Luxul XWR-1750 - Manual (Page 22)

22
XWR-1750
a: 14203 Minuteman Drive, Suite 201, Draper, UT 84020-1685 | luxul.com | 801-822-5450
LUX-UG-XWR-1750 Vers: 022515
w
IP Address: Allows you to specify the IP Address that is assigned to the specified
Client Device. The IP Address entered here can be inside or outside of the DHCP
Pool configured on the Router (see
Network>>DHCP Server for details).
w
MAC Address: Allows you to enter the MAC Address of the Client Device for
which the Static Lease is being configured. This is what the Router will use to
identify the Client Device and issue the Static Lease.
w
Add/Update:Allows you to Add your Static Lease to the Static Leases table or Edit
an existing Static Lease. This also Saves the Static Lease settings, allowing you to
browse to another page in the Router before rebooting to apply the changes.
w
Reboot: This button is used to Reboot the Router after making configuration
changes or can be used to Reboot the Router for any reason.
„
Static Leases Table: Displays the Static Leases configured on the Router and allows
you to Edit or Delete individual entries.
w
Hostname: Displays the Hostname of the Client Device.
w
IP Address: Displays the IP Address of the Client Device.
w
Mac Address: Displays the MAC Address of the Client Device.
w
Edit: Allows you to Edit the selected Static Lease by entering the lease informa-
tion in the Static Assignments section. Simply make changes and click the Update
button to Save. This requires a Reboot to apply the changes.
w
Delete: This button allows you to Delete the selected Static Lease and Saves the
changes, allowing you to browse to any other setup page.
NOTE: After making any changes to the Static Leases you must click the
Add/Update/Delete buttons to Save your changes, then you must
click the Reboot button for the changes to take effect. You can
click the Add/Update/Delete buttons and proceed to other pages
without losing your configured changes.