Luxul XWR-1750 - Manual (Page 12)

12
XWR-1750
a: 14203 Minuteman Drive, Suite 201, Draper, UT 84020-1685 | luxul.com | 801-822-5450
LUX-UG-XWR-1750 Vers: 022515
w
Custom MAC Address: Allows you to set a Custom MAC Address which allows the
Router to appear as a Computer to the ISP Modem. Some Modems will cache the
MAC Address of the first device used to setup Internet Service and cannot be reset
by the user. If this occurs you can clone that setup Device’s MAC Address to allow
the XWR-1750 to connect to the Modem.
w
Custom MTU: Allows you to configure a Custom MTU setting. MTU (or Maximum
Transmission Unit), is the maximum packet size allowed on the network. Some ISPs
(usually DSL or Fiber) will require this value to be set if the Modem is in
Bridge mode.
„
After making any changes to the Connection Type, you must click the Save button
to Save your changes, then you must click the Reboot button for the changes to take
effect. You can click the Save button and proceed to other pages without losing your
configured changes.
3.1.3 Connection Type Static IP
This Connection Type option requires the Static IP, Netmask, Gateway, Primary DNS and
Secondary DNS provided by the ISP to be entered manually. This type will never have an
IP Address change on the connection and is typically used in Business or Remote Access
implementations.
Select the Menu Quick Setup and Connection Type Static IP from the dropdown to
view the following page:
„
Internet/WAN: Displays the WAN connection Options
w
Connection Type: Select the desired WAN Connection Type. When set to
Static IP, you must enter the IP information that the ISP provides allowing the
Router to connect.