Luxul XWR-1750 - Manual (Page 35)

35
User Guide
© 2015 Luxul. All Rights Reserved.
Other trademarks and registered trademarks are the property of their respective owners
w
IP Address: Allows you to specify the Local Device IP Address to which all incom-
ing traffic should be passed.
w
Save: This button is used to Save the configuration changes made on this page.
Once you have clicked Save, you may move to other pages in the Router setup.
Most changes will require a Reboot to allow the changes to take effect.
w
Reboot: This button is used to Reboot the Router after making configuration
changes or can be used to Reboot the Router for any reason.
w
Cancel: This button Cancels any changes made on this page.
NOTE: After making any changes to the DMZ you must click the Save button
to Save your changes, then you must click the Reboot button for the
changes to take effect. You can click the Save button and proceed to
other pages without losing your configured changes.
NOTE: DMZ is typically used for Web Server installations and all Firewall and
Security resides on the device specified in the DMZ. Please consult
your Network Administrator if you are asked to configuring a DMZ.
3.6.3 UPnP
This page displays the UPnP Settings currently configured on the Router.
Select the menu Firewall/Security>>UPnP to display the following page:
„
UPnP Configuration: Displays the UPnP (Universal Plug and Play) configuration.
w
UPnP: Allows you to Enable or Disable UPnP on the Router. Enabled is the default.
„
Available Networks: Displays which Networks on the Router have UPnP Enabled.
w
Local Network/LAN: Allows you to enable UPnP for the configured
Local Network.