Luxul XWR-600 - Manual (Page 20)

20
XWR-600
a: 14203 Minuteman Drive, Suite 201, Draper, UT 84020-1685 | luxul.com | 801-822-5450
LUX-UG-XWR-600 Vers: 07814
NOTE: The information categories are the same for the 2.4GHz SSID and
5GHz SSID.
NOTE: The Rate value for all devices will change depending on Wireless
signal quality and strength
3.3 Network
There are four submenus in the Network menu: DHCP Server, Static Leases, Dynamic
DNS and Routing. Click a submenu to view and/or modify the corresponding settings.
3.3.1 DHCP Server
This page displays the DHCP Server Settings configured on the Router.
Select the menu Network>>DHCP Server to display the following page:
„
DHCP: Displays the DHCP Server settings of the Router. These settings can be viewed
or modified here.
w
Enable DHCP Server: Allows you to Enable or Disable the Router’s DHCP Server.
Enabled is the default setting.
„
DHCP Range: Displays the DHCP Pool settings of the Router. These settings can be
viewed or modified here.
w
Start: Allows you to set the Starting IP Address of the DHCP Pool. 192.168.0.100 is
the default setting.
w
End: Allows you to set the Ending IP Address of the DHCP Pool. 192.168.0.200 is the
default setting.