Luxul XWR-600 - Manual (Page 26)

26
XWR-600
a: 14203 Minuteman Drive, Suite 201, Draper, UT 84020-1685 | luxul.com | 801-822-5450
LUX-UG-XWR-600 Vers: 07814
NOTE: When selecting the Channel Width option 20/40MHz, a second
Channel option will appear allowing you to set if the secondary
channel used by 40MHz is below or above your current Channel.
„
5GHz Options: Displays the 5GHz Wireless options active on the Router.
w
Wireless Radio: Allows you to Enable or Disable the 5GHz Wireless Radio in the
Router. Enabled is the default setting.
w
Wireless Mode: Allows you to specify the 802.11 Wireless mode to which the
5GHz Radio will operate. Supported modes include 802.11+a and 802.11a. 802.11+a is
the default and recommended setting.
w
Channel Width: Allows you to specify the 5GHz Channel Width used by the
Router. Supported widths include 20/40MHz Auto and 20MHz. 20/40MHz Auto is
the default setting. When selecting the Wireless Mode 802.11a, the Channel Width
is forced to 20MHz only.
w
Channel: Allows you to specify the Channel used by the 5GHz Radio in the Router,
the supported Channels will change depending on the Wireless Mode 802.11n+g
offers 36, 40, 44, 48, 149, 153, 157 and 161. While 802.11a offers 36, 40, 44, 48, 149,
153, 157, 161 and 165 (the available options are non-overlapping channels) 153 is the
default setting.
w
Save: This button is used to Save the configuration changes made on this page.
Once you have clicked Save, you may move to other pages in the Router setup.
Most changes will require a Reboot to allow the changes to take effect.
w
Reboot: This button is used to Reboot the Router after making configuration
changes or can be used to Reboot the Router for any reason.
w
Cancel: This button Cancels any changes made on this page.
NOTE: After making any changes to Wireless Settings you must click the
Save button to Save your changes, then you must click the Reboot
button for the changes to take effect. You can click the Save button
and proceed to other pages without losing your configured changes.