Luxul XWR-600 - Manual (Page 21)

21
User Guide
© 2014 Luxul. All Rights Reserved.
Other trademarks and registered trademarks are the property of their respective owners
w
Lease Time (hours): Allows you to set the number of Hours the Client Device
DHCP Lease is valid before requiring a DHCP Renew. 12 Hours is the default setting.
w
Save: This button is used to Save the configuration changes made on this page.
Once you have clicked Save, you may move to other pages in the Router setup.
Most changes will require a Reboot to allow the changes to take effect.
w
Reboot: This button is used to Reboot the Router after making configuration
changes or can be used to Reboot the Router for any reason.
w
Cancel: This button Cancels any changes made on this page.
NOTE: After making any changes to the DHCP Server, you must click the
Save button to Save your changes. Then you must click the Reboot
button for the changes to take effect. You can click the Save button
and proceed to other pages without losing your configured changes.
3.3.2 Static Leases
This page displays the DHCP Static Leases configured on the Router.
Select the menu Network>>Static Leases to display the following page:
„
Static Assignments: Allows you to specify a Hostname and IP Address to be assigned
to the Client Device with the specified MAC Address. This Device from this point
forward will always receive this IP Address from the Router when using DHCP.
w
Hostname: Allows you to specify a Hostname for easy identification of the
Client Device.