Martin Christ RVC 2-18 CDplus - Manual (Page 57)

RVC 2-18 CD&
8 Maintenance and service
Version 04/2012, Rev. 1.3 of 25/11/2013 • sb
57
Translation of the original operating manual
Pos: 172 /20 0 Ch rist/3 70 RVC-BA (S TANDARDMODULE) /08 0 Wart ung un d Inst and haltu ng/ 080 -004 0 I nsta ndh altun gsar beite n @ 8\m od_1 310 027 462 633 _68. docx @ 47 306 @ 2 @ 1
8.4 Service
DANGER
In the event of service work that requires the removal of the panels, there
is a risk of electric shock or mechanical injury. Only qualified specialist
personnel is authorised to perform this service work.
The rotational vacuum concentrator is subject to high mechanical stress. In
order to be able to withstand this high level of stress, high-quality
components were used during the production of the rotational vacuum
concentrators. Nevertheless, wear cannot be excluded and it may not be
visible from the outside.
This is why we recommend having the rotational vacuum concentrator
checked by the manufacturer during an inspection once per year in the
operating state and once every three years in the dismantled state.
Information and appointments:
In Germany:
• Use the service request form at
www.martinchrist.de [Service area]
or contact
• Martin Christ Gefriertrocknungsanlagen GmbH
An der Unteren Söse 50
37520 Osterode
Tel. +49 (0) 55 22 / 50 07-84 25
Fax +49 (0) 55 22 / 50 07-94 25
E-mail: [email protected]
Outside Germany:
• Contact our agency in your country. All agencies are listed at
www.martinchrist.de [Contacts] [Foreign agencies]
NOTE
• If you would like to utilise our service, please state the type of your
RVC and its serial number.
• Please use the online service request on the Internet.
Pos: 173 /01 0 Univ ersal mod ule/ Sei tenwe chsel @ 0\ mod _12 021 1624 431 2_0 .docx @ 1 05 @ @ 1