Important safety instructions – Mighty Mule FM502 Dual Swing - Blue Board User Manual

Page 11

Advertising
background image

7

IMPORTANT SAFETY INSTRUCTIONS

These warning labels should be found at the locations
specified below. If any of them are missing,
immediately contact GTO for replacements.

!

Warning signs (2 enclosed) to be installed on each side
of the gate (3–5 feet above the bottom of the gate)

Maximum Gate: 500 lb. (226.7 kg); 16 ft. (4.8 m)
Voltage: 12 Vdc; Frequency: 0 Hz; Power: 25 W
Class I, II, III and IV Vehicular Swing Gate Operator.
Serial Number: XXXXXXXXXX

#xxxxxxx

Conforms to UL 325 STANDARDS

TO MANUALLY OPEN AND CLOSE THE GATE:
1. Turn control box power switch OFF.
2. Disconnect front or rear mount from gate bracket.
3. Pull opener away from front or rear mount.

DC SWING SERIES / 500

GTO, Inc. Tallahassee, Florida USA

Disconnect operator ONLY when the control box power
switch is OFF and the gate is NOT moving.

LISTED

US

502

UL325 SERIES

®

®

E-Z GATE OPENER

Product identification and manual operation instruction
label (1) installed on the right side of the control box.

Logo and warning labels (2) installed on each side of
opener housing

Advertising