Peg-Perego Primo Viaggio Convertible User Manual
Page 38
- 38 -
2. Attach the rear facing strap to the vehicle
front seat rail. If your vehicle has a plastic
seat rail cover, you may want to remove it to
gain better access to the seat rail. Wrap the
strap around the rail then thread the metal
plate through the loop so it points upward as
shown.
3. Attach the child restraint tether hook to
the plate and pull the free end of the tether
strap until it is free.
Note: Too much tension in the tether strap will
change the seat back angle. After removing
the slack from the tether, check to see thet
the seat back angle is correct.
If your vehicle has designated anchors for a
tether strap used in rear facing mode, do not
use the additional rear facing tether strap.
Installing your child restraint in the vehicle - Rear Facing mode