Peg-Perego Primo Viaggio Convertible - Manual (Page 56)

- 56 -
Cleaning and maintenance
1. Pull the head panel all the way up. Detach
shoulder belts from rear metal plate in the back
of the child restraint. Turn it around and pull
the straps from the openings at shoulder level.
1
Your child restraint requires a minimum of cleaning and maintenance. Do not clean with harsh
products or solvents. Keep moving parts clean. In case, clean plastic parts with a damp cloth.
Do not use water with harness and latching mechanisms. Protect it from extreme cold, water,
rain and sun exposure. Prolonged exposures to these elements can change the colors in the
material but also change their mechanical properties. Store it in a dry area if not used for long
periods. Warning! Do not use or purchase the child restraint 7 years after the production date
labelled on the seat or shell. The upholstery is likely to be removed and cleaned frequently.
Follow the procedure below to remove the fabric and reassemble it properly. Check the child
restraint features before disassembly and make sure that the same features are still working
once it is set up for use again. Extra care is required when removing padding to avoid breaking
the white EPS panels on the product.