Peg-Perego Primo Viaggio Convertible - Manual (Page 40)

- 40 -
4. Attach the lower connectors to the lower
anchors of your vehicle located at the joint
line between seat and backrest. Check your
vehicle owner’s manual to learn what is the
best place for your car . When the LATCH
straps are connected to the lower anchors, an
audible click will be heard. If this is not the
case, repeat the operation and double check
that the latch is attached and working by
trying to pull the lower connector away from
the lower anchor.
5. Push down the child restraint (A) into the
seat with your own body weight and at the
same time pull the strap ends (B) in order
to tighten the latch straps. Check that the
connectors are evenly tightened and that the
seat is not leaning sideways.
6. Picture shows the correct strap path when
the child restraint is attached to the vehicle
using the LATCH connectors.
Verify that the child restraint is secure. A
secure child restraint will not move more
than 1 inch near the LATCH anchors.
Installing your child restraint in the vehicle - Forward Facing mode
5 4
6
A
B