Pitney Bowes MapXtreme - Manual (Page 531)

Appendix E: Printing From MapXtreme Applications
Resolutions to Known Printing Issues
MapXtreme v7.1 538 Developer Guide
2. Click the Advanced tab. Select the following options:
• Select the Avoid out of memory option.
• If you are using the Windows 2000 or XP operating system, select a scaling factor of 100%.
3. From this dialog box, click the Printing Defaults button.
4. In this dialog box, select the About button. The About <Driver Name> dialog box displays.
5. Holding down the F8 key on your keyboard, click the OK button. The Special Options dialog box
displays:
6. Clear the Enable SpoolSmart check box and click OK:
L
When you modify settings in this driver option box, make sure to note the original settings in
case you need to change them back. These were designed for HP Support Engineers and
not for general public use.
You can save these settings as a Quick Set to ensure that they run every time you print raster files.
1. Navigate to the HP printer driver and access the driver preferences. Use one of these methods
based on your operating system:
•
Using Windows NT 4.0 — From the Windows desktop, select Start > Settings > Printers.
Then, right-click the appropriate plotter driver icon and choose Document Defaults.
• Using Windows 2000/XP (Classic View) — From the Windows desktop, select Start >
Settings > Printers. Then, right-click the appropriate plotter driver icon and choose Printing
Preferences.
2. Set the preferences the way you want them in the hidden menu.
3. In the Quick Sets box, type a name for the selected settings (for example, "Raster Print
Settings") and click Save. All current driver settings (paper type, hidden menu settings, etc.) are