Pitney Bowes MapInfo Vertical Mapper - Manual (Page 106)

Displaying Legends
104
Vertical Mapper 3.7
The Range tab displays and allows editing of the values to be plotted on a legend bar. The values
and percentiles that appear are those that you have defined in the Grid Colour Tool as the colour
inflection points.
For numeric grids the values and percentiles that appear in the top portion of the dialog box
represent the colour inflection points currently used. It is these values that will be used by default.
For classified grids this area displays only the different class names.
For numeric grids, you can enter new values into the legend using the Insert button or you can
remove values using the Delete button. These commands are not available for classified grids.
The following options are available on the Range tab:
The Show Value check box and the Show Pct. check box enable you to display values only,
percentiles only, or both beside the legend colour bar. These check boxes are not available
for classified grids.
The Horizontal or Vertical buttons enable you to set the orientation of the colour legend.
Classified grids will appear only in vertical form.
The Text tab enables you to control the placement and formatting of textual elements that appear in
the legend including the title, label position, font style, and size.