Pitney Bowes MapInfo Vertical Mapper - Manual (Page 148)

Reclassing Classified Grids
146
Vertical Mapper 3.7
4. To save the reclass profile to a .pfr file, click the Save button.
5. In the File name box, type a new file name or accept the default.
6. Click the OK button.
7. If you select to Numeric (*.grd), the Classified to Numeric Grid Converter dialog opens. In
this dialog box, you can do the following:
•
All the classes that are present in the classified grid are listed. Default values are already
assigned to each of them. If you want to edit the value, double-click on Class Value column
in the dialog next to the class you want to change and assign a new value.
• For each of the classes you can assign them colour by clicking on Colour column next to the
class you want to change and assign colour. The colour dialog is displayed in which you can
select the desired colour.
• You can also use Set from table to assign values to classes from existing open table.
Note All classes must be reassigned before you can generate the new grid.
Exploring the Classified Grid Reclass Dialog Box
The Classified Grid Reclass dialog box enables you to select and reassign classes or groups from
the Original Classes list to the New Classes list. You can do this either by clicking and dragging
original classes to new ones or by clicking the Add button. A small triangle marker appears beside
the class name in the Original Classes list if it has been successfully reassigned to a new class.
When a class is highlighted in the New Classes list, all of the classes assigned to it will be listed in
the Assigned Class(es) list. It also makes it possible for you to verify whether any particular original
classes or groups are reassigned to new classes or groups.
The Original Classes list lists all the classes and groups contained in the original classified grid.
The New Classes list lists the new classes that the new classified grid will contain.