Pitney Bowes MapInfo Vertical Mapper - Manual (Page 200)

198
Vertical Mapper 3.7
The Base section contains settings to control the display and size of the base of the grid.
• The Show Base check box specifies whether the base will be displayed or not (see the next
figuresa). This setting is typically used in conjunction with the Draw Underside check box.
• The Thickness box enables you to set the thickness of the base in the coordinate units of the
master grid (see the next figures).
A rendered scene with Base A rendered scene without Base
A rendered scene with the default
base thickness A rendered scene with an increased
base thickness