Rocktron Utopia B300 - Manual (Page 51)

51
8. Selecting a preset:
1
There are two ways to select a preset on the UTOPIA B300. You can either turn the PRESET knob to
the desired preset you wish to recall. The display will show the selected preset number.
The second way to select a preset with the UTOPIA B300 is to use the footswitches. Use the BANK UP
and DOWN buttons (points 1 and 2 in the drawing below) to scroll through the BANKS. Then select a
preset using the buttons marked 0-9 (see points 3-12 below). Note that each button corresponds to the
last number in the preset of the bank selected. For example if you want to select preset 29, use the bank
up button until you reach bank B02 and then press button 9 - this is preset 29. To select preset 38, use
the bank up button until you see B03 in the display and then press button 8 - this is preset 38 and it will
appear in the window.
You will remain on the current preset until one of the preset buttons, marked 0-9 (points 3-12 below) is
pressed. This is a useful feature in a live situation allowing you to be ready to select the next sound you
would like to use in a song.
b 0 4 d i r t y - c h o r u s
4 1 c h r - d l y - r e v