Rocktron Utopia B300 - Manual (Page 67)

67
Step 1 To access the Pedal Controller function, turn the FUNCTION SELECT knob clockwise to
"PEDAL CONTROLERS".
p e d a l c o n t r o l e r s
Step 2
Step 5
Step 4
Step 3
Use the PARAMETER ADJUST knob to scroll through the available parameters to be as-
signed to the PARA 1 parameter.
Turn the PARAMETER SELECT knob to select "PARA 1". This parameter allows you to
select a parameter for the PARA 1 parameter to respond to.
Turn the PARAMETER SELECT knob for the first parameter of the Controller Assign func-
tion. This parameter allows you to select a controller number for the NUMB 1 parameter to
respond to.
NOTE: This parameter (NUMB 1 only) also gives you the option of selecting "ADJ".
Use the PARAMETER ADJUST knob to select the controller to be assigned to the NUMB 1
parameter (either ADJ, IPED, IPSW or OFF).
When "ADJ" is selected, the parameter assigned to the first controller (PARA 1) can be
instantly accessed by turning the PARAMETER ADJUST knob when the preset title is dis-
played. This allows you to access a parameter that you adjust frequently without paging
through function headings and parameters. If you select "IPED" the parameter assigned to
the first controller (NUMB 1) will be adjusted by the built-in expression pedal. If you select
"OFF" the first controller will not be assigned to either the "ADJ or the IPED".
8. Pedal Controllers continued........
p e d a l c o n t r o l e r s
n u m b 1 a d j
p e d a l c o n t r o l e r s
n u m b 1 i p e d
p e d a l c o n t r o l e r s
p a r a 1 m i x d i r
p e d a l c o n t r o l e r s
p a r a 1 p e d a l v o l u