Taser CAM-HD - Manual (Page 43)

TASER CAM HD Recorder
MMU0036 Rev: B Page 43 of 48
Chapter 9: Use and Care
Storage
Do not store the TASER CAM HD recorder in extreme cold or heat.
Do not store the TASER CAM HD recorder where the contacts may
become short-circuited.
Keep the TASER CAM HD recorder dry.
Recharge the battery every 30 to 60 days if not in use. This is intended to
maintain battery integrity.
Cleaning
Lens
Clean any debris, fingerprints, dust, etc. from the lens using a soft cloth such
as an eyeglass lens cloth. Avoid using any synthetic cleaners (for example
Windex® or similar cleaners).
Gold Contacts
Debris on the gold contacts may cause the TASER CAM HD recorder and/or
the X2 ECD to not function correctly. Clean the contacts using the TASER
International recommended cleaning kit.
Battery
The TASER CAM HD recorder uses a lithium ion rechargeable battery.
Fully charge the battery before using the TASER CAM HD recorder for
the first time.
Frequently charge the battery. Do not let the battery capacity go below
50 percent.
Keep the TASER CAM HD recorder away from extreme temperatures.
Do not recharge the battery out of the recommended temperature range
of 32 °F to 104 °F (0 °C to 40 °C).
Battery performance will decrease over time and in lower-temperature
environments.