Auto take-off height hold attitude gain, Attitude gain, Auto take-off – XAIRCRAFT Super X User Manual

Page 20: Height hold

Advertising
background image

17

©2013 XAircraft All Rights Reserved.

Auto Take-off

Push throttle to neutral point immediately after motors started, SuperX will auto take -off and
hang about on 1.5 meters high. The height hold precision is affected near the ground; some types
of small copter can get rid of the ground effect about 1 meter high.

Height Hold

Notice:
1. In manual mode, Height Hold function is unavailable.
2. In other flight modes Height Hold function is always on.

Keep Height when throttle at

neutral point

Lifting when throttle higher

than neutral point

Falling when throttle lower

than neutral point

During a fast cruise flight, copter height variance is normal due to the varying pressure.

Attitude Gain

When copter payloads or power changed, or using different frames, you will need to adjust
attitude Gain to profit stable flight.
Attitude Gain is divided into two parts, Basic Gain and RC Gain:
1. Basic Gain: needs to be set in software. A knob (RC Gain Input) adjusts the attitude gain

based on this basic gain.

Advertising