Flash-to-pass, Windshield wipers, Flash-to-pass windshield wipers – Pontiac 2007 Torrent User Manual

Page 153

Advertising
background image

Flash-to-Pass

This feature lets you use your high-beam
headlamps to signal a driver in front of you that
you want to pass.

To flash the high beams from low beam, pull the
turn signal/multifunction lever all the way
towards you. Then release it.

Windshield Wipers

Be sure to clear ice and snow from the wiper
blades before using them. If the wiper blades are
frozen to the windshield, gently loosen or thaw
them. If the blades do become damaged,
install new blades or blade inserts. See Windshield
Wiper Blade Replacement
on page 384.

Heavy snow or ice can overload the wiper motor.
A circuit breaker will stop the motor until it
cools down. Clear away snow or ice to prevent
an overload.

Use the lever on the right side of the steering
column to operate the windshield wipers.

1

(High Speed): Move the lever to this position

for steady wiping at high speed.

6

(Low Speed): Move the lever to this

position for steady wiping at low speed.

153

Advertising