Removing the flat tire and installing the, Spare tire – Pontiac 2007 Torrent User Manual

Page 411

Advertising
background image

Removing the Flat Tire and
Installing the Spare Tire

You must take off the wheel cover or center cap, if
the vehicle has one, to reach the wheel bolts.

1. Loosen all five

plastic caps by
turning the wheel
wrench
counterclockwise.
Do not try to remove
plastic caps from
the cover or
center cap.

2. Pull the cover or center cap away from the

wheel.

3. Use the wheel wrench to loosen all the wheel

nuts. Do not remove them yet.

4. Attach the wheel wrench to the jack bolt head

and turn the wheel wrench clockwise. That
will raise the lift head a little.

5. Place the jack near the flat tire.

Notice: Make sure that the jack lift head is in
the correct position or you may damage
your vehicle. The repairs would not be covered
by your warranty.

411

Advertising