Defogging and defrosting – Pontiac 2007 Torrent User Manual

Page 168

Advertising
background image

For quick cool down on hot days, do the following:

1. Select the vent mode.

2. Select the outside air.

3. Select air conditioning.

4. Select the coolest temperature.

5. Select the highest fan speed.

6. Once the vehicle’s interior temperature is

below the outside temperature, select
recirculation mode for enhanced cooling.

Using these settings together for long periods of
time may cause the air inside of the vehicle
to become too dry. To prevent this from
happening, after the air inside of the vehicle has
cooled, turn the recirculation mode off.

The air conditioning system removes moisture
from the air, so you may sometimes notice a small
amount of water dripping underneath the vehicle
while idling or after turning off the engine. This
is normal.

(

(Heated Seats): If your vehicle has heated

seats, see Heated Seats on page 11.

Defogging and Defrosting

Fog or frost on the inside of windows is a result of
high humidity (moisture) condensing on the cool
window glass. This can be minimized if the climate
control system is used properly. To avoid fogging
windows on rainy and humid days at temperatures
above freezing, turn on the air conditioning
system. Also, it is best to avoid the use of the
recirculation mode, except when maximum
A/C performance is needed or for short times to
avoid exterior odors.

Use the defog mode to clear the windows of fog
or moisture and warm the passengers. Use
the defrost mode to remove fog or frost from the
windshield more quickly. When you select either of
these modes, or the floor mode which also
helps defog the windows slightly, the system runs
the air conditioning compressor and cancels
recirculation mode to dry the air; however, the
recirculation light will stay on. For best results,
clear all snow and ice from the windshield before
defrosting.

Turn the right knob to select the defog or
defrost mode.

168

Advertising