Pilz PIT m3.1p - Manual (Page 3)

Pilz GmbH & Co. KG, Felix-Wankel-Straße 2, 73760 Ostfildern, Germany
Telephone: +49 711 3409-0, Telefax: +49 711 3409-133, E-Mail: [email protected]
1
Contents
Contents
Contents Page
Chapter 1 Introduction
1.1 Validity of documentation 1-1
1.1.1 Retaining the documentation 1-1
1.2 Overview of documentation 1-2
1.3 Definition of symbols 1-3
Chapter 2 Overview
2.1 Features of the operating mode selector
switch 2-2
2.2 Actuator features 2-3
Chapter 3 Safety
3.1 Intended use 3-1
3.2 Safety regulations 3-2
3.2.1 Use of qualified personnel 3-2
3.2.2 Warranty and liability 3-2
3.2.3 Disposal 3-2
Chapter 4 Function description
4.1 Key ID number of the actuator 4-3
4.2 Communication with the control system 4-4
Chapter 5 Installation
5.1 General installation guidelines 5-1
5.1.1 Dimensions 5-1
5.1.2 Mounting cutout 5-3
Chapter 6 Wiring
6.1 Terminal Configuration 6-1
6.2 Connection to safety system (example) 6-2
6.3 Connection to PNOZmulti (example: PNOZ
m1p) 6-3
Chapter 7 Operation
7.1 Select operating mode 7-2
7.2 Time monitoring 7-3
7.3 Select special mode (service) 7-4
7.4 Evaluation through safety system 7-5
7.5 Troubleshooting 7-6
7.6 Diagnostics 7-7
7.6.1 Signal outputs for status information 7-7