Pilz PIT m3.1p - Manual (Page 31)

Pilz GmbH & Co. KG, Felix-Wankel-Straße 2, 73760 Ostfildern, Germany
Telephone: +49 711 3409-0, Telefax: +49 711 3409-133, E-Mail: [email protected]
7-3
7.2 Time monitoring
7 Operation
7.2 Time monitoring 7200 Time monitoring 7- Zeitüberwachung BAWS
A change of operating modes is only detected once a button has been
operated for a certain time period.
Operating time:
 OM1, OM2, OM3, OM4: > 50 ms and < 5 s
 Special mode (service) OM5: > 5 s and < 10 s
When a button is released, the semiconductor outputs will switch once
the switchover delay t1 has elapsed (see Technical details).
When changing operating modes, the PIT m3.1p initiates a defined
pause of 50 ms to guarantee that the operating modes do not overlap.
To select an operating mode, follow the instructions below:
Select an operating mode by pressing one of the four buttons. The ac-
tuator must be connected to the operating mode selector switch for the
whole time the button is operated; it can be removed afterwards.
t1 t1
OM5
OM1
OM2
OM3
OM4