Latch child-restraint fixing system – Mini 2009 Cooper Convertible User Manual
Page 43
41
LATCH child-restraint
fixing system
LATCH: Lower Anchors and Tethers for CHildren.
To install and use the LATCH child-
restraint system, follow the operating and
safety instructions provided by the manufac-
turer of the system, otherwise the protective
function of the seat may be compromised.
<
Anchor points for LATCH anchors
Before installing the child's seat, pull the belt out
of the area for the child-restraint fixing system.
The anchor points for the lower LATCH anchors
are located behind the labeled protective caps.
Make sure that both lower LATCH anchors
are properly engaged and that the child-
restraint system rests firmly against the seat
backrest, otherwise the protective function of
the seat may be compromised.
<
Child-restraint system with tether strap
Use the tether strap anchors to secure
child-restraint systems only, otherwise the
anchors could be damaged.
<
There are two additional anchors for child-
restraint systems with tether straps, arrows.
Placement of the tether strap
Make sure the upper retaining strap does
not run over sharp edges and is not
twisted as it passes to the top anchor. Otherwise
the strap will not properly secure the child-
restraint system in the event of an accident.
<
MINI
1 Direction of travel
2 Head restraint
3 Tether strap hook
4 Cargo bay floor
5 Anchor
6 Seat backrest
7 Tether strap of the child-restraint system
1.
Push the head restraint upward.
2.
Guide the tether strap between the head
restraint holders.
3.
Attach the tether strap to the anchor using
the hook.
4.
Push the head restraint into its lowermost
position.
5.
Attach the tether strap to the anchor using
the hook.
6.
Pull the retaining strap tight.
Online Edition for Part no. 01 41 2 601 570 - © 11/08 BMW AG