Mini 2009 Cooper Convertible User Manual

Page 83

Advertising
background image

REFERENCE

AT A GLANCE

CONTROLS

DRIVIN

G TIP

S

MOBILITY

81

Air flow rate, manual

Press the – button to reduce air flow. Press
the + button to increase it.
You can reactivate the automatic mode
for the air flow rate with the AUTO button.

The air flow rate is lowered or switched off
entirely to save on battery power. The display
remains the same.

Switching the system on/off

Reduce the air flow by pressing the – button
repeatedly until the system is switched off. All
indicators go out.
Press the AUTO button to switch the automatic
climate control back on.

AUTO program

The AUTO program adjusts the air
distribution to the windshield and

side windows, towards the upper body area and
into the footwell for you. The air flow rate and
your temperature specifications will be adapted
to outside influences in accordance with sea-
sonal changes, e.g. sunlight.
The cooling function is automatically switched
on along with the AUTO program.

Convertible Program

If the soft top is open, the Convertible Program is
activated.During the Convertible Program, the
automatic climate control is optimized for driv-
ing with the soft top down. Furthermore, with
increasing vehicle speed, the airflow is also
increased.

If attaching the wind reflector, the perfor-
mance of the Convertible Program can be

significantly improved.

<

Automatic recirculated-air control
AUC*/Recirculated-air mode

Switch on the desired operating
mode by pressing the button
repeatedly.

Display of operating modes

No display: outside air flows in continuously.

AUC mode: a sensor detects pollutants
in the outside air. If necessary, the sys-
tem blocks the supply of outside air and

recirculates the inside air. As soon as the con-
centration of pollutants in the outside air has
decreased sufficiently, the system automatically
switches back to outside air supply.
At outside temperatures below approx.
41

7/+5 6, the AUC mode may be restricted

due to the increased risk of window condensa-
tion.

Recirculated-air mode: the supply of
outside air is permanently shut off. The
system then recirculates the air cur-

rently within the vehicle.

If condensation starts to form on the
inside window surfaces, press the AUTO

button or switch off the recirculated-air mode
and, if necessary, increase the air flow rate.
The recirculated-air mode should not be used
over an extended period of time, otherwise the
air quality inside the car will deteriorate contin-
uously.

<

Maximum cooling

At outside temperatures above
32

7/0 6 and when the engine is

running, you obtain a maximum

cooling effect as soon as possible.
The automatic climate control goes into recircu-
lated-air mode at the lowest temperature. Air
flows at maximum rate from the vents for the
upper body area. You should therefore open
them for maximum cooling.

Air distribution, manual

The flow of air is directed to the
windows, to the upper body area or
to the footwell as selected.
You can switch the automatic air

distribution back on by pressing the AUTO but-
ton.

Online Edition for Part no. 01 41 2 601 570 - © 11/08 BMW AG

Advertising