Starting the engine, Engineswitching off, Driving – Mini 2009 Cooper Convertible User Manual

Page 46

Advertising
background image

Driving

44

Starting the engine

Do not allow the engine to run in enclosed
spaces; otherwise inhalation of the nox-

ious exhaust gases can lead to unconsciousness
and death. Exhaust gases contain carbon mon-
oxide, an odorless and colorless, but highly toxic
gas. Never leave an unattended vehicle with the
engine running, otherwise such a vehicle repre-
sents a potential safety hazard.
Before leaving the car while the engine is run-
ning, place the transmission in neutral or move
the selector lever to position P and forcefully
apply the parking brake to prevent the car from
moving.

<

Avoid frequent starting in quick succes-
sion or repeated start attempts in which

the engine does not start. Otherwise, the fuel is
not burned or inadequately burned and there is
a danger of overheating and damaging the cat-
alytic converter.

<

Do not let the engine warm up with the vehicle
at a standstill. Move off immediately at a moder-
ate engine speed.
When starting the engine, do not depress the
accelerator pedal.

Manual transmission

Key in ignition lock or inside vehicle with conve-
nient access, refer to page

26

.

1.

Depress the brake.

2.

Depress the clutch.

3.

Press the start/stop button.

Automatic transmission

Key in ignition lock or inside vehicle with conve-
nient access, refer to page

26

.

1.

Depress the brake.

2.

Shift the selector lever into position P or N.

3.

Press the start/stop button.

The starter operates automatically for a certain
time, and stops automatically as soon as the
engine has started.

Engineswitching off

Always take the key with you when you
leave the vehicle.

When parking, apply the parking brake force-
fully, otherwise the vehicle could begin to roll.

<

Manual transmission

1.

With the car at a standstill, press the
start/stop button.

2.

Shift into first gear or reverse.

3.

Forcefully apply the parking brake.

Automatic transmission

1.

With the car at a standstill, move the selector
lever to position P.

2.

Press the start/stop button.

3.

Forcefully apply the parking brake.

Before driving into a car wash

By following these steps, the vehicle is able to
roll:

1.

Place the remote control, even with conve-
nient access, in the ignition lock.

2.

Depress the brake.

3.

Move the selector lever to position N.

4.

Switch off the engine.

Online Edition for Part no. 01 41 2 601 570 - © 11/08 BMW AG

Advertising