Altera ByteBlasterMV - Manual (Page 11)

Altera Corporation 1–3
Installing the ByteBlasterMV Download Cable
3. In the Multimedia Properties dialog box, click the Devices tab, and click
Add.
4. In the List of Drivers list, select Unlisted or Updated Driver and
click OK.
5. In the Install Driver dialog box, type <disk drive>:\<Quartus II system
directory>\drivers or select the name with Browse (...) to specify the
Quartus II software drivers directory.
6. Click OK.
7. In the Add Unlisted or Updated Driver dialog box, select Altera
ByteBlaster.
8. To restart your computer, click Restart Now.
Installing the Altera ByteBlaster Driver on Windows 2000
The Altera ByteBlaster driver is required for PCs running Windows 2000 that use
the ByteBlasterMV download cable. You must install the Altera ByteBlaster
driver separately from the Quartus II software.
1 You do not need to install the ByteBlasterMV download cable before
installing the Altera ByteBlaster kernel driver.
1 Installing the Altera ByteBlaster kernel driver requires that you have
administration (administrator) privileges.
To install the Altera ByteBlaster driver for Windows 2000, follow these steps:
1 You can also use the BBLPT utility to install the Altera ByteBlaster.
f For more information, go to “Installing the Altera ByteBlaster Driver with the
BBLPT Utility” on page 1–2 .
1. Choose Settings > Control Panel (Windows Start menu).
2. In the Control Panel window, double-click the Add/Remove Hardware
icon and click Next.
3. In the Choose a Hardware Task page of the Add/Remove Hardware
wizard, select Add/Troubleshoot a device and click Next.
4. In the Choose a Hardware Device page, select Add a new device and
click Next.