Altera ByteBlasterMV - Manual (Page 18)

1–10 Altera Corporation
Installation
2. Under JTAG Chain Configuration, select ByteBlasterMV in the
Hardware pulldown list.
If the communications cable that you want to use does not appear in the
Hardware list, continue as follows:
3. Under JTAG Chain Configuration, click Setup.
4. Click Add Hardware in the Hardware Setup dialog box to add a
hardware setup for the communications cable.
f For more information about SignalTap II logic analysis with the ByteBlasterMV
download cable, refer to “Selecting the Communications Cable for the
SignalTap II Logic Analyzer” in Quartus II Help.
Ordering code: PL-BYTEBLASTERMV