Altera ByteBlasterMV - Manual (Page 12)

1–4 Altera Corporation
Installation
5. In the Find New Hardware page, select No, I want to select the
hardware from a list and click Next.
6. In the Hardware Type page, select Sound, video and game controllers
and click Next.
7. In the Select a Device Driver page, select Have disk.
8. Specify the full directory path to the \<Quartus II system
directory>\drivers\win2000 directory with Browse (...), and click OK.
9. In the Digital Signature Not Found page, click Yes.
10. In the Select a Device Driver page, select either ByteBlaster II or
ByteBlasterMV, and click Next.
11. In the Start Hardware Installation page, click Next.
12. In the Digital Signature Not Found page, click Yes.
13. In the Completing the Add/Remove Hardware Wizard page, click
Finish.
14. To restart your computer, click Restart Now.
Installing the Altera ByteBlaster Driver on Windows XP
The Altera ByteBlaster driver is required for PCs running Windows XP that use
the ByteBlasterMV download cable. You must install the Altera ByteBlaster
driver separately from the Quartus II software.
1 You do not need to install the ByteBlasterMV download cable before
installing the Altera ByteBlaster kernel driver.
1 Installing the Altera ByteBlaster kernel driver requires that you have
administration (administrator) privileges.
To install the Altera ByteBlaster driver for Windows XP, follow these steps:
1 You can also use the BBLPT utility to install the Altera ByteBlaster.
f For more information, go to “Installing the Altera ByteBlaster Driver with the
BBLPT Utility” on page 1–2 .
1. Choose Control Panel (Windows Start menu).
2. Click the Switch to Classic View link.