Pci development kit, cyclone ii edition contents, Inspect the board, Hardware requirements – Altera PCI Development Kit, Cyclone II Edition Getting Started User Manual
Page 12
2–2
Core Version a.b.c variable
Altera Corporation
PCI Development Kit, Cyclone II Edition Getting Started User Guide
May 2005
Before You Begin
PCI Development Kit, Cyclone II Edition Contents
The PCI Development Kit, Cyclone II Edition contains the following items:
■
Cyclone II EP2C35 PCI development board with an EP2C35F672
Cyclone II device (ordering code: PCI-DEVKIT-2C35)
■
PCI Development Kit, Cyclone II Edition CD-ROM, version 1.0.0
●
PCI-to-DDR2 reference design
●
Cyclone II PCI development kit application and device driver
●
Board manufacturing files
■
Quartus
®
II Software Development Kit Edition (DKE), version 5.0
■
Jungo WinDriver Development Toolkit
1
The Jungo CD-ROM provides a free 30-day evaluation of
Jungo’s Driver Development Toolkit. For more information
on the driver, refer to the documentation on the CD-ROM.
■
PLD Applications PCI-X CORE CD-ROM
■
MegaCore
®
IP Library CD-ROM, version 5.0, which contains the PCI
Compiler and DDR & DDR2 Controller Compiler
■
USB-Blaster
™
download cable and USB cable
■
Power supply and three separate adapter cables for North
America/Japan, Europe, and the United Kingdom
Inspect the Board
Place the board on an anti-static surface and inspect it to ensure that it has
not been damaged during shipment. Verify that all components are on
the board and appear intact.
1
Without proper anti-static handling, the Cyclone II EP2C35 PCI
development board can be damaged.
f
Refer to the Cyclone II EP2C35 PCI Development Board Reference Manual
(available on the PCI Development Kit, Cyclone II Edition CD-ROM) for
information on the board’s components.
Hardware Requirements
The Cyclone II EP2C35 PCI development board is initially configured for
installation in a conventional PCI slot.
You can use the Cyclone II EP2C35 PCI development board in either a
3.3- or 5.0-V PCI system and in either a 32- or 64-bit PCI bus slot. To use
the board with the kit’s demo application, you need a PC with an
available PCI or PCI-X bus slot.