Address offset & target loop (debug tab) – Altera PCI Development Kit, Cyclone II Edition Getting Started User Manual
Page 24
2–14
Core Version a.b.c variable
Altera Corporation
PCI Development Kit, Cyclone II Edition Getting Started User Guide
May 2005
Perform PCI Transactions with the Kit’s Demo Application
Address Offset & Target Loop (Debug Tab)
In this example, a target loop/target write transaction is followed by a
target read. The address offset changes the transaction’s starting address.
1.
Ensure that the Debug tab is active.
2.
Select Target Loop from the Commands box.
3.
In the Address Offset box, type 0x0000028.
4.
Keep the following values in the Address/Size box:
●
Transfer Length: 4096
●
Iterations: 2
5.
In the Data Type list, select Inc Packet.
6.
Click Execute.
7.
Review the starting address of the data transaction in the Display
Window
Figure 2–8. Address Offset & Target Loop (Debug Tab)