Set up the programming download, Figure a–3 – Altera PCI Express Development Kit, Stratix II GX Edition Getting Started User Manual
Page 27
Advertising
Altera Corporation
Getting Started User Guide
A–5
March 2008
PCI Express Development Kit, Stratix II GX Edition
Figure A–3. Setting Input Files to Convert
9.
Click Generate to produce the Programmer Object File that is stored
in the flash device.
Set Up the Programming Download
1.
To open the programmer, click on Programmer in the Tools menu.
2.
Click the Hardware Setup button and select the download cable
you are using, the USB Blaster in this example.
3.
Set Mode to JTAG.
shows an example of the selections.
Advertising