Altera Temperature Sensor - Manual (Page 11)

Date Document
Version
Changes Made
June 2013 3.1
• Updated the “Temperature Sensing Operation” on page 3–1 to
clarify that enabling the ADC allows you to measure the
temperature of the device only once and to include a warning
about a minimum pulse violation when input clock derived
from a PLL.
• Updated “Features” on page 1–1 to notify that this IP core
does not provide simulation feature.
September 2010 3.0
• Updated the Parameter Settings chapter.
• Added the Prototypes and Component Declarations section.
• Added the Clear Box Generator chapter.
February 2010 2.0 Updated the Temperature Sensing Operation section.
November 2009 1.0 Initial release.
UG-01074
2015.05.04
Document Revision History 11
Altera Temperature Sensor IP Core User Guide Altera Corporation
Send Feedback