Engine oil, Checking the oil level, Cylinder engine – Saab 2000 9-5 User Manual

Page 171: V6 engine

Advertising
background image

171

Car care and technical information

Engine oil

Checking the oil level

Check the engine-oil level regularly. This
should be done after the engine has been
run to normal temperature and then allowed
to cool for 2–5 minutes, with the car stand-
ing on level ground. Remove the dipstick
and wipe it clean before checking the level.

4-cylinder engine

The oil level must not be allowed to drop
below the MIN mark on the dipstick, nor
should oil be filled beyond the MAX mark, as
this can lead to excessive oil consumption.
The distance between the MIN and MAX
marks on the dipstick corresponds to a
volume of approximately 1.05 qts (1 liter).
When necessary, add oil of the recom-
mended grade via the dipstick tube.

V6 engine

The oil level must not be allowed to drop
below the MIN mark on the dipstick, nor
should oil be filled beyond the MAX mark, as
this can lead to excessive oil consumption.
The distance between the MIN and MAX
marks on the dipstick corresponds to a
volume of approximately 1.05 qts (1 liter).
Top up, as necessary, with oil of the recom-
mended grade.

IB491

Engine-oil filler cap and dipstick,
4-cylinder engine

IB1

123

Engine-oil dipstick and filler cap,
V6 engine

Advertising