Maintenance, Safety belts – Saab 2000 9-5 User Manual

Page 207

Advertising
background image

207

Car care and technical information

Maintenance

• The drive belt for the compressor should

be inspected under the regular service
program.

• Clean dirt and insects away from the con-

denser and radiator to prevent clogging.
When washing the car, use the hose to
spray the radiator and condenser (located
forward of the radiator) from both sides
(both from the front of the car and from
inside the engine bay). Do not use a pres-
sure washer.
Caution: Do not use the hose when the
engine is hot.

Other than in extremely cold weather, do not
screen the radiator, e.g. with netting, as this
will greatly diminish its cooling capacity.
Note: The A/C system will only operate
when the outdoor temperature is above the
freezing point (0°C, 32°F).

Safety belts

Regularly check the function of the safety
belts as follows:

• Hold the diagonal strap and pull it sharply.

The safety belt should lock and it should
not be possible to withdraw it further.

Check the anchorage points in the floor.
They must not have suffered rust damage.
There must be no frayed threads in the web-
bing.
Safety belts must not come into contact with
substances such as polishes, oils or other
chemicals. If the straps are dirty, wash them
with warm water and a detergent or have
them replaced.

WARNING

If the car is involved in a collision, the
safety belts, belt pretensioners and other
components must be inspected by an
authorized Saab dealer.

Never make any alterations or repairs to
the safety belt yourself but visit an autho-
rized Saab dealer.

Advertising