Changing a wheel – Saab 2000 9-5 User Manual

Page 203

Advertising
background image

203

Car care and technical information

Changing a wheel

WARNING

• The car jack is designed solely for use

in changing a wheel or fitting snow
chains. It must not be used to support
the car during repair work or servicing.

• Never crawl under a car that is

supported only by a jack.

• Special care must be taken if the car is

on a slope – use wheel chocks!

• Position chocks, one ahead and one

behind, the wheel that is diagonally
opposite to the one to be changed.

• Switch on the hazard warning lights if

the car is on a road.

• Apply the handbrake and leave the car

in gear (1st or reverse). Automatic
transmission: move selector to the
P position.

• Ensure that everybody is out of the car

before jacking it up.

• Never start the engine while the car is

jacked up.

• The jack must stand on a firm, level

surface.

• Stow the jack in the place provided for

it under the panel in the floor of the lug-
gage compartment. Secure it properly
to avert injury to passengers in the
event of an accident.

• Do not use the jack for any purpose

other than for jacking up the car.

Advertising