Lane tracking package, Driving and parking, Driving systems – Mercedes-Benz 2013 CLA Class User Manual
Page 199
R
the traffic signs are poorly illuminated
R
there are ambiguous traffic signs, for
instance near roadworks or on multi-lane
roads
Information in the multifunction display
Briefly showing detected traffic signs in
the multifunction display
X
Activate the Speed Limit Assist warning
function using the on-board computer
(
A traffic sign indicating a speed limit or the
end of a speed limit appears in the multi-
function display for around five seconds as
soon as it is detected. Any other informa-
tion in the multifunction display is hidden
for this period.
:
Speed Limit Assist is available and
switched on
;
Traffic sign indicating a speed limit or the
end of a speed limit (example)
=
Own vehicle
Permanently showing detected traffic
signs in the multifunction display
X
Display the assistance graphic using the
on-board computer (
A traffic sign indicating a speed limit or the
end of a speed limit ; appears in the mul-
tifunction display as soon as it is detected.
Traffic sign indicating a speed limit ; is
generally displayed until:
R
a traffic sign indicating the end of the
speed limit is detected.
R
you make a turn.
R
you leave or enter a town.
R
the road type changes (e.g. motorway,
country road).
R
you have travelled a certain minimum
distance without the traffic sign being
repeated or detected again.
i
You can also activate Speed Limit Assist
using COMAND Online. The maximum per-
missible speed is shown in the COMAND
display; see the COMAND Online operating
instructions.
Lane Tracking package
General notes
The Lane Tracking package consists of Blind
Spot Assist (
Blind Spot Assist
General notes
Blind Spot Assist uses a radar sensor system
to monitor the areas on both sides of your
vehicle. It supports you from speeds of
30 km/h. A warning display in the exterior
mirrors draws your attention to vehicles
detected in the monitored area. If you then
switch on the corresponding turn signal to
change lane, you will also receive an optical
and audible collision warning. For this pur-
pose, Blind Spot Assist uses sensors in the
rear bumper.
Driving systems
197
Driving and parking
Z