Tyre pressure monitor, Check the tyre pressure, Wheels and tyres – Mercedes-Benz 2013 CLA Class User Manual

Page 324: Tyre pressure

Advertising
background image

If you wish to confirm the restart:

X

Press the a button.
The

Tyre press. now OK?

message

appears in the multifunction display.

X

Press the 9 or : button to select

Yes

.

X

Press the a button.
The

Run Flat Indicator restarted

message appears in the multifunction dis-
play.
After a teach-in period, the tyre pressure
loss warning system will monitor the set
tyre pressures of all four tyres.

If you wish to cancel the restart:

X

Press the % button.

or

X

When the

Tyre press. now OK?

message

appears, press the 9 or : button to
select

Cancel

.

X

Press the a button.
The tyre pressure values stored at the last
restart will continue to be monitored.

Tyre pressure monitor

General notes

If a tyre pressure monitor system is fitted, the
vehicle's wheels have sensors fitted that
monitor the tyre pressures in all four tyres.
The tyre pressure monitor warns you if the
pressure drops in one or more of the tyres.
The tyre pressure monitor only functions if
the corresponding sensors are fitted to all
wheels.
Information on tyre pressures is shown in the
multifunction display. After a few minutes of
driving, the current tyre pressure of each tyre
is shown in the

Service

menu of the multi-

function display. For further information on
displaying this message, refer to the "Check-
ing the tyre pressure electronically" section
(

Y

page 323).

Important safety notes

It is the driver's responsibility to set the tyre
pressure to the recommended cold tyre pres-
sure suitable for the operating situation
(

Y

page 319). Note that the correct tyre pres-

sure for the current operating situation must
first be taught-in to the tyre pressure monitor.
If there is a substantial loss of pressure, the
warning threshold for the warning message is
aligned to the reference values taught-in.
Restart the tyre pressure monitor after
adjusting to the cold tyre pressure
(

Y

page 324). The current pressures are

saved as new reference values. This will
ensure that a warning message will only
appear if the tyre pressure drops significantly.
The tyre pressure monitor does not warn you
of an incorrectly set tyre pressure. Observe
the notes on the recommended tyre pressure
(

Y

page 319).

The tyre pressure monitor is not able to warn
you of a sudden loss of pressure, e.g. if the
tyre is penetrated by a foreign object. In the
event of a sudden loss of pressure, bring the
vehicle to a halt by braking carefully. Avoid
abrupt steering manoeuvres.
The tyre pressure monitor has a yellow warn-
ing lamp in the instrument cluster for indicat-
ing a pressure loss or malfunction. Depending
on how the warning lamp flashes or lights up,
a tyre pressure that is too low or a malfunc-
tion in the tyre pressure monitor is indicated:

R

if the warning lamp is lit continuously, the
tyre pressure on one or more tyres is sig-
nificantly too low. The tyre pressure moni-
tor is not malfunctioning.

R

if the warning lamp flashes for around a
minute and then remains lit constantly, the
tyre pressure monitor is malfunctioning.

i

In addition to the warning lamp, a mes-

sage appears in the multifunction display.
Further information can be found on
(

Y

page 248).

If the tyre pressure monitor is malfunctioning,
it may take more than ten minutes for the tyre

322

Tyre pressure

Wheels and tyres

Advertising