Problems with the sliding sunroof, Opening and closing, Panorama sliding sunroof – Mercedes-Benz 2013 CLA Class User Manual

Page 94

Advertising
background image

Opening and closing

Overhead control panel
:

To open

;

To open

=

To close

X

Turn the key to position

1 or 2 in the ignition

lock.

X

Press or pull the 3 switch in the corre-
sponding direction.

i

If you press the 3 switch beyond the

point of resistance, an automatic opening/
closing process is started in the corre-
sponding direction. You can stop automatic
operation by pressing again.

i

After opening the sliding sunroof, the

roller sunblind closes slightly automati-
cally. This reduces drafts in the vehicle inte-
rior.

Resetting the sliding sunroof and the

roller sunblinds

If the sliding sunroof or the roller sunblinds
do not move smoothly, reset the sliding sun-
roof and the roller sunblinds:

X

Turn the key to position

1 or 2 in the ignition

lock.

X

Pull the 3 switch repeatedly to the point
of resistance in the direction of arrow =
until the sliding sunroof is fully closed.

X

Keep the 3 switch pulled for an addi-
tional second.

X

Pull the 3 switch repeatedly to the point
of resistance in the direction of arrow =
until the roller sunblinds are fully closed.

X

Keep the 3 switch pulled for an addi-
tional second.

X

Make sure that the sliding sunroof
(

Y

page 90) and the roller sunblinds

(

Y

page 92) can be fully opened and closed

again.

X

If this is not the case, repeat the steps
above again.

Problems with the sliding sunroof

G

WARNING

If you do not reset the sliding sunroof after a
malfunction or voltage supply interruption,
then the reversing function will malfunction or
not work. The sliding sunroof closes with
increased or maximum force. Parts of the
body could be trapped in the closing area in
the process. This poses an increased risk of
injury or even fatal injury.
In such or similar situations always make sure
that no parts of the body are in the closing
area. Always reset the sliding sunroof after a
malfunction or voltage supply interruption.

Problem: the sunroof cannot be closed

and you cannot see the cause. If the sliding

sunroof is obstructed during closing and
reopens again slightly:

X

Immediately after it blocks, pull the 3
switch down again to the point of resist-
ance until the sliding sunroof is closed
The sliding sunroof is closed with increased
force.

If the sliding sunroof is obstructed again dur-
ing closing and reopens again slightly:

X

Immediately after it blocks, pull the 3
switch down again to the point of resist-
ance until the sliding sunroof is closed
The sliding sunroof is closed without the
anti-entrapment feature.

92

Panorama sliding sunroof

Opening and closing

Advertising