Combination switch, Lights and windshield wipers, Exterior lighting – Mercedes-Benz 2012 B Class User Manual

Page 102

Advertising
background image

Rear fog lamp
The rear fog lamp improves visibility of your
vehicle for the traffic behind in the event of
thick fog. Please take note of the country-
specific regulations for the use of rear fog
lamps.

X

To switch on the rear fog lamps: turn the

SmartKey in the ignition lock to position

2

or start the engine.

X

Turn the light switch to L or Ã.

X

Press the R button.
The yellow R indicator lamp in the
instrument cluster lights up.

X

To switch off the rear fog lamp: press the
R button.
The yellow R indicator lamp in the
instrument cluster goes out.

Parking lamps

!

If the battery has been excessively

discharged, the parking lamps or standing
lamps are automatically switched off to
enable the next engine start. Always park
your vehicle safely and sufficiently lit
according to legal standards. Avoid the
continuous use of the T parking lamps
for several hours. If possible, switch on the
X right or the W left standing lamp.

X

To switch on: turn the light switch to
T.
The green T indicator lamp in the
instrument cluster lights up.

Standing lamps
Switching on the standing lamps ensures the
corresponding side of the vehicle is
illuminated.

X

To switch on the standing lamps: the

SmartKey is not in the ignition lock or it is
in position

0.

X

Turn the light switch to W (left-hand side
of the vehicle) or X (right-hand side of
the vehicle).

Combination switch

Turn signal

:

High-beam headlamps

;

Turn signal, right

=

High-beam flasher

?

Turn signal, left

X

To indicate briefly: press the combination

switch briefly to the pressure point in the
direction of arrow ; or ?.
The corresponding turn signal flashes three
times.

X

To indicate: press the combination switch

beyond the pressure point in the direction
of arrow ; or ?.

High-beam headlamps

X

To switch on the high-beam headlamps:

turn the SmartKey in the ignition lock to
position

2 or start the engine.

X

Turn the light switch to L or Ã.

X

Press the combination switch beyond the
pressure point in the direction of
arrow :.
In the à position, the high-beam
headlamps are only switched on when it is
dark and the engine is running.

100

Exterior lighting

Lights and windshield wipers

Advertising