Driving and parking, Driving systems – Mercedes-Benz 2012 B Class User Manual

Page 160

Advertising
background image

to lose traction and the vehicle could then
skid

R

when there is poor visibility, e.g. due to fog,
heavy rain or snow

If there is a change of drivers, advise the new
driver of the speed stored.

General notes

Cruise control maintains a constant road
speed for you. It brakes automatically in order
to avoid exceeding the set speed. On long and
steep downhill gradients, especially if the
vehicle is laden, you must select a low gear in
good time. For this, you will need to have
selected manual drive program
M(

Y

page 144). By doing so, you will make

use of the braking effect of the engine, This
relieves the load on the brake system and
prevents the brakes from overheating and
wearing too quickly.
Use cruise control only if road and traffic
conditions make it appropriate to maintain a
steady speed for a prolonged period. You can
store any road speed above 20 mph
(30 km/h).

Cruise control lever

:

To activate or increase speed

;

To activate or reduce speed

=

To deactivate cruise control

?

To activate at the current speed/last
stored speed

When you activate cruise control, the stored
speed is shown in the multifunction display
for five seconds.

Activation conditions

To activate cruise control, all of the following
activation conditions must be fulfilled:

R

the electric parking brake must be
released.

R

you are driving faster than
20 mph(30 km/h).

R

ESP

®

must be active, but not intervening.

R

on vehicles with automatic transmission,
the selector lever must be in position

D.

Storing, maintaining and calling up a

speed

Storing and maintaining the current

speed
You can store the current speed if you are
driving faster than 20 mph (30km/h).

X

Accelerate the vehicle to the desired
speed.

X

Briefly press the cruise control lever
up : or down ;.

X

Remove your foot from the accelerator
pedal.
Cruise control is activated. The vehicle
automatically maintains the stored speed.

i

Cruise control may be unable to maintain

the stored speed on uphill gradients. The
stored speed is resumed when the gradient
evens out. Cruise control maintains the
stored speed on downhill gradients by
automatically applying the brakes.

Storing the current speed or calling up the

last stored speed

G

WARNING

If you call up the stored speed and it differs
from the current speed, the vehicle
accelerates or decelerates. If you do not know
the stored speed, the vehicle could accelerate

158

Driving systems

Driving and parking

Advertising