NISSAN 2011 Cube - Manual (Page 254)

Black plate (252,1)
Model "Z12-D" EDITED: 2010/ 9/ 27
Carefully read the caution label attached
to the jack body and the following instruc-
tions.
SCE0812
Jack-up point
1. Place the jack directly under the jack-up
point as illustrated so the top of the jack
contacts the vehicle at the jack-up point.
Align the jack head between the two
notches in the front or the rear as shown.
Also fit the groove of the jack head between
the notches as shown.
The jack should be used on level firm
ground.
6-6 In case of emergency