NISSAN 2011 Cube - Manual (Page 36)

Black plate (32,1)
Model "Z12-D" EDITED: 2010/ 9/ 27
WARNING
. After adjustment, release the ad-
justment button and try to move the
shoulder belt anchor up and down
to make sure it is securely fixed in
position.
. The shoulder belt anchor height
should be adjusted to the position
best for you. Failure to do so may
reduce the effectiveness of the
entire restraint system and increase
the chance or severity of injury in an
accident.
SSS0964
Seat belt hooks (except for Cargo Van
models)
When the rear seat belts are not in use and
when folding down the rear seats, hook the rear
outer seat belts on the seat belt hooks.
The hook for the rear center seat belt is located
on the left wall behind the rear seat. (See “Rear
center seat belt (except for Cargo Van models)”
later in this section for details.)
SSS0391
Rear center seat belt (except for Cargo
Van models)
The rear center seat belt has a connector tongue
*
1 and a seat belt tongue
*
2 . Both the
connector tongue and the seat belt tongue must
be securely latched for proper seat belt opera-
tion.
1-18 Safety — Seats, seat belts and supplemental restraint system