Window washer fluid -12 – NISSAN 2011 Cube User Manual

Page 286

Advertising
background image

Black plate (284,1)

Model "Z12-D" EDITED: 2010/ 9/ 27

SDI2387

Check the fluid level in the reservoir. If the fluid is
below the MIN line

*

1

or the brake warning

light comes on, add Genuine NISSAN Super
Heavy Duty Brake Fluid or equivalent DOT 3
fluid up to the MAX line

*

2

. If fluid must be

added frequently, the system should be checked
by a NISSAN dealer.

SDI2388

Type A

SDI2429

Type B

To fill the window washer fluid reservoir, lift the
cap and pour the window washer fluid into the
reservoir opening.

Add a washer solvent to the washer for better
cleaning. In the winter season, add a windshield
washer antifreeze. Follow the manufacturer’s
instructions for the mixture ratio.

Fill the window washer fluid reservoir periodi-
cally.

Type A

Add fluid when the low washer fluid warning
light illuminates.

Type B

To check the fluid level, use your finger to plug
the center hole

*

1

of the cap/tube assembly,

then remove it from the reservoir. If there is no
fluid in the tube, add fluid.

Refill the reservoir more frequently when driving
conditions require an increased amount of
window washer fluid.

Recommended fluid:
Genuine NISSAN Windshield Washer Concen-
trate Cleaner & Antifreeze or equivalent

WINDOW WASHER FLUID

8-12

Maintenance and do-it-yourself

Advertising