NISSAN 2011 Cube - Manual (Page 294)

Black plate (292,1)
Model "Z12-D" EDITED: 2010/ 9/ 27
SDI1959
ENGINE COMPARTMENT
CAUTION
Never use a fuse of a higher or lower
amperage rating than that specified on
the fuse box cover. This could damage
the electrical system or cause a fire.
If any electrical equipment does not operate,
check for an open fuse.
1. Be sure the ignition switch and the headlight
switch are turned off.
2. Open the engine hood.
3. Remove the resonator. (See “ENGINE
COMPARTMENT CHECK LOCATIONS”
earlier in this section.)
4. Remove the fuse/fusible link holder cover by
pushing the tab
*
1 and lifting the cover
from the right side
*
2 , then the left side
*
3 .
5. Locate the fuse that needs to be replaced.
6. Remove the fuse using the fuse puller
located in the passenger compartment fuse
box.
SDI1753
7. If the fuse is open
*
A , replace it with a new
fuse
*
B .
8. If a new fuse also opens, have the electrical
system checked and repaired by a NISSAN
dealer.
The holder
*
4 also contains the fuses. For
checking and/or replacing, see a NISSAN
dealer.
FUSES
8-20 Maintenance and do-it-yourself