NISSAN 2011 Cube - Manual (Page 288)

Black plate (286,1)
Model "Z12-D" EDITED: 2010/ 9/ 27
DI0137MA
Check the fluid level in each cell. It should be
between the UPPER LEVEL
*
1 and LOWER
LEVEL
*
2 lines.
If it is necessary to add fluid, add only distilled
water to bring the level to the indicator in each
filler opening. Do not overfill.
SDI1480C
1. Remove the cell plugs
*
A .
2. Add distilled water up to the UPPER LEVEL
*
1 line.
If the side of the battery is not clear, check
the distilled water level by looking directly
above the cell; the condition
*
1 indicates
OK and the condition
*
2 needs more to be
added.
3. Tighten cell plugs
*
A .
Vehicles operated in high temperatures or under
severe conditions require frequent checks of the
battery fluid level.
JUMP STARTING
If jump starting is necessary, see “JUMP
STARTING” in the “6. In case of emergency”
section. If the engine does not start by jump
starting, the battery may have to be replaced.
Contact a NISSAN dealer.
8-14 Maintenance and do-it-yourself