NISSAN 2008 Titan User Manual

Page 168

Advertising
background image

● Average Speed - Average speed driven

(MPH or km/h) since the last reset.

Resetting trip 1 and trip 2

Each trip screen can be reset to 0. Press the TRIP

button to select the TRIP screen to be reset.

● Select the “Reset” key on screen by press-

ing the ENTER button, or

● Press the TRIP button for more than approxi-

mately 1.5 seconds.

Fuel economy

Press the TRIP button to display Average Fuel

Economy and Distance To Empty.
Average fuel economy (MPG or L/100 km)

The Average Fuel Economy is calculated based

on fuel consumption since the last reset. The

display is updated every 30 seconds and 1/3

mile (500 m). After a reset or connecting the

battery cables, the display will show (**.*).

Resetting fuel economy
The average fuel economy calculation can be

reset to 0. Press the TRIP button repeatedly until

the FUEL ECONOMY menu is shown, then ei-

ther:

● Select the “Reset” key on screen by press-

ing the ENTER button, or

● Press the TRIP button for more than approxi-

mately 1.5 seconds.

Distance to empty (MI or km)
The Distance To Empty (DTE) mode provides you

with an estimation of the distance that can be

driven before refueling. The DTE is constantly

calculated based on the amount of fuel in the fuel

tank and the actual fuel consumption. The display

is updated every 30 seconds. When the fuel level

is low, the DTE display will change to (*).

NOTE:

● If the amount of fuel added while the ignition

switch is OFF is small, the display just before

the ignition switch is turned OFF may con-

tinue to be displayed.

● When driving uphill or rounding curves, the

fuel in the tank shifts, which may momentarily

change the display.

LHA0553

4-4

Display screen, heater, air conditioner, audio and phone systems

REVIEW COPY—

2008 Titan (tzw)

Owners Manual—USA_English (nna)
10/11/07—debbie

Advertising