NISSAN 2008 Titan User Manual

Page 194

Advertising
background image

3. Turn the fan control dial to the desired posi-

tion.

4. Turn the temperature control dial to the de-

sired position.

Defrosting or defogging

This mode directs the air to the defrost outlets to

defrost/defog the windows.

1. Turn the air flow control dial to the

position.

2. Turn the fan control dial to the desired posi-

tion.

3. Turn the temperature control dial to the de-

sired position between the middle and the

hot position.

● To quickly remove ice or fog from the win-

dows, turn the fan control dial to 4 and the

temperature control lever to the full HOT

position.

● When the

position is selected, the air

conditioner automatically turns on (however,

the indicator light on the

button will

not come on and A/C will not appear on the

display, if so equipped) if the outside tem-

perature is more than 36°F (2°C). If in de-

frost mode for more than one minute, the air

conditioning system will continue to operate

until the vehicle is shut off, or the A/C button

is used to turn off the compressor even if the

air flow control dial is turned to a position

other than the

position. This dehu-

midifies the air which helps defog the wind-

shield. The

mode automatically turns

off, allowing outside air to be drawn into the

passenger compartment to further improve

the defogging performance.

Bi-level heating

The bi-level mode directs warmed air to the side

and center vents and to the front and rear floor

outlets.

1. Push the

button to the OFF position.

The indicator light on the

button will

go off. (

will appear on the display, if so

equipped.)

2. Turn the air flow control dial to the

position.

3. Turn the fan control dial to the desired posi-

tion.

4. Turn the temperature control dial to the de-

sired position.

Heating and defogging

This mode heats the interior and defogs the wind-

shield.

1. Turn the air flow control dial to the

position.

2. Turn the fan control dial to the desired posi-

tion.

3. Turn the temperature control dial to the de-

sired position between the middle and the

hot position.

● When the

position is selected, the air

conditioner automatically turns on (however,

the indicator light on the

button will

not come on and A/C will not appear on the

display, if so equipped) if the outside tem-

perature is more than 36°F (2°C). If in de-

frost mode for more than one minute, the air

conditioning system will continue to operate

until the vehicle is shut off, or the A/C button

is used to turn off the compressor even if the

air flow control dial is turned to a position

other than the

position. This dehu-

midifies the air which helps defog the wind-

shield. The

mode automatically turns

off, allowing outside air to be drawn into the

passenger compartment to further improve

the defogging performance.

Operating tips

Clear snow and ice from the wiper blades

and air inlet in front of the windshield. This

improves heater operation.

4-30

Display screen, heater, air conditioner, audio and phone systems

REVIEW COPY—

2008 Titan (tzw)

Owners Manual—USA_English (nna)
10/11/07—debbie

Advertising