Variable voltage control system -15 drive belt -15 – NISSAN 2008 Titan User Manual

Page 321

Advertising
background image

CAUTION

Do not ground accessories directly to

the battery terminal. Doing so will by-

pass the variable voltage control sys-

tem and the vehicle battery may not

charge completely.

Use electrical accessories with the en-

gine running to avoid discharging the

vehicle battery.

Your vehicle is equipped with a variable voltage

control system. This system measures the

amount of electrical discharge from the battery

and controls voltage generated by the generator.

The current sensor

A

is located near the battery

along the negative battery cable. If you add elec-

trical accessories to your vehicle, be sure to

ground them to a suitable body ground such as a

frame or engine block area.

1.

Power steering fluid pump

2.

Crankshaft

3.

Generator

4.

Air conditioner

5.

Water pump

6.

Cooling fan

WARNING

Be sure the ignition key is in the OFF or

LOCK position before servicing drive belt.

The engine could rotate unexpectedly.

WDI0566

LDI0399

VARIABLE VOLTAGE CONTROL

SYSTEM

DRIVE BELT

Maintenance and do-it-yourself

8-15

REVIEW COPY—

2008 Titan (tzw)

Owners Manual—USA_English (nna)
10/12/07—debbie

Advertising